nivelo CUSTOM SENSOR

Mobile data logger for groundwater measuring points from 2″ as a remote transmission unit for sensors with RS485 / RS232 interface. Ideally suited for integrating existing sensors into the online world of groundwater monitoring, including online platform for visualization and alarming.

Description

Permanent remote data readout

The future-proof LTE-M1/NB-IoT mobile technology with integrated SIM (optional custom SIM) enables worry-free, Europe-wide connectivity out-of-the-box. No data gaps thanks to continuous synchronization of memory and real-time clock.

Long runtime

Up to 8 years runtime with a single battery pack ensures low maintenance in the field thanks to ultra-low power technology. The service life depends on the selected interval for recording and data transmission as well as the mobile phone reception and the sensor type.

PC und Handy mit Zugriff auf Online-Datencenter
Online data access and remote configuration

The web platform, the cell.datacenter, provides data storage, visualization and remote configuration. Access is via PC, tablet or smartphone. No further software is required.

Protocols and data forwarding

Create automatic data logs in pdf format, use the measuring point file to store documents or forward your data from the field to third-party systems such as hydrogeological software packages and web platforms via FTP, REST-API or OPC-UA.

Quick setup and installation

With the cell.datacenter, you can set up measuring points with just a few clicks and put data loggers into operation in just a few minutes. The matching accessories such as cover and sealing caps, suspension rings, suspensions and antennas ensure uncomplicated installation in the field.

Alerting

Actively receive alarms via high-priority SMS or e-mail from the field. Set online limit values for all data channels, monitor the function of the data transmission and the system status of your measuring device (battery, humidity, temperature).

nivelo CUSTOM SENSOR

Product information

nivelo CUSTOM SENSOR

Technical Datasheet
HousingStainless steel 1.4435, can be opened in the field without tools
Dimensions: Ø 42.4 mm x 165 mm with pressure compensation element
Cable gland for cables with diameters from 3.6 to 6.4 mm
Protection classIP65 / IP68
IP68 - only with professional installation
Power supplyLithium primary battery
3.6 V / 5,500 mAh - field replaceable
Remote transmissionMobile radio LTE-CAT-M1 and LTE-CAT-NB2
SIM chip integrated or with custom SIM
Near field communicationBluetooth
Advertisement and configuration mode with app for parameterization in the field
AntennaRod antenna
SMA, length 50 mm
Operating temperature-20 °C ... +60 °C *
Normal: -10 °C ... +60 °C
Sensor interfacesRS485
I2C
RS232 half-duplex
Internal sensorsBarometer ± 1 mbar
Temperature ± 2 °C
Humidity ± 3 %rH
Supply voltage
Sensor supply5..24 V, 1 W
Weightapprox. 650 g
Internal measurement data memoryapprox. 8,000 data records

* Under special conditions such as low temperatures, poor cellular network strength and partially discharged batteries, there can be scenarios where occasional transmission failures may occur in ranges below the normal operating temperature range.

Sensor

InterfaceRS485
Compatible sensors with RS485 interface, e.g.SEBA Dipper PT
SEBA Dipper PTEC
OTT PLS-C
UIT CTD
interfaceRS232
Compatible sensors with RS232 interface, e.g.vanESSEN TD-Diver*
vanESSEN Cera-Diver*
vanESSEN CTD-Diver*

* with DiverDataCable

Product Variations

Get started with nivelo

Not found the right one?

Then get in touch with us directly – we will be happy to advise you!

Personal consultation

Additional information

Application

Energy supply

Product Type

Control capability

No control